You’ve been planning on washing your car for days, but you keep finding excuses to put it off another day. On the other hand, you’ve also been putting it off because you don’t even know where to start. However, washing your car by yourself doesn’t have to be a hassle if you know what you are doing. To make your life easier, here are some useful tips that will make washing your car can faster and easier.
Protect the Bodywork of Your Car
Make sure that before you start washing your car, any loose dirt or mud is removed with a soft brush or cloth so as not to scratch the paintwork while brushing off particles. If you use a pressure washer, water may get into crevices and cause damage later on when you drive over large stones and such debris that would grind against openings. Also, keep an eye out for any dirt that might be sitting on top of rubber seals – this kind of dirt could also scratch the paint when you go over it with a washing mitt. If you see any of this, wipe it away with a cloth soaked in a little bit of cleaning fluid.
Use The Right Washing Equipment
Your choice of washing equipment will be determined by the size and type of vehicle you are washing. If you have a sports car with lots of curves and crevices then it’s best to use microfiber cloths, sponges, and brushes, while a power washer is better for large trucks, RVs, or other vehicles that allow enough space to maneuver around them safely. Be sure not to press down too hard when using any tools or accessories, as this could scrape paintwork. If you’re concerned about scratches, use the attachments such as brush mitts instead of concentrating water pressure. Where necessary, get undercarriage components wet before spraying with water; this will prevent unnecessary scrubbing.
Wash Your Car in the Right Order
Start from the roof and work your way down. When you wash a car, water can run down onto the paintwork as well as into every nook and cranny where dirt is likely to accumulate. If you start washing your car from the top instead of from underneath, this will help prevent those particles from making their way onto your main bodywork. However, if for some reason you need to clean an underbody component such as a wheel or mudguard, ensure that it’s thoroughly dry before spraying any water over it so as not to cause rusting.
Use The Right Car Washing Product
Never use dish detergent or hand soap as this can strip protective wax from your paintwork, leading to dulling and eventual corrosion of certain metal panels such as those found around windows and doorways. A gentle shampoo formulated for cars is ideal for both indoor and outdoor use, especially when used with a pressure washer nozzle. You can also opt for eco-friendly products that contain no chemicals or abrasive substances to protect your car’s paint and components. Additionally, Always remember to rinse away debris with plenty of clean water before you dry it off. Doing so will prevent watermarks from being left behind that can be difficult to remove without specialist products and equipment.
Knowing how to wash your car step by step is an important skill, and with these tips in mind, you’ll be able to protect your paint and get the job done quickly and easily. Just make sure that you clean it regularly, and that you only use the right tools and cleaners for this purpose.
